Diesel Glow Plugs: What They Do, Failure Signs and Replacement
- Written by
- Diesel Glow Plug Editorial Team
- Reviewer
- Diesel Glow Plug Editorial Team
- Review date
- First published
A glow plug is an electric heater in a diesel engine's cylinder head that helps a cold engine start. Diesels ignite fuel with the heat of compressed air, but in cold conditions that heat is not enough, so glow plugs add it. A dash light tells you when the plugs have finished pre-heating, and failed plugs show up as hard cold starts.
A glow plug is a small electric heater that helps a cold diesel engine start. This page is the hub for the glow plug guides on Diesel Glow Plug, which sells no parts and offers no repair service. For the engine as a whole, see the diesel engine overview.
What a glow plug is
A glow plug is an electric heating element screwed into a diesel engine’s cylinder head. A diesel does not use a spark to ignite its fuel: as the US Department of Energy explains, it draws in only air, compresses it, and sprays fuel into the hot compressed air so the fuel ignites. Bosch states that heating the air to a minimum starting temperature of 850 degrees Celsius is critical for diesel start-up.
When the engine is cold, that is hard to achieve. Bosch says cold intake air and cold cylinder walls hinder reaching the necessary temperature, and glow plugs act as an additional heat source to bring the intake air up to it. NGK compares them to an immersion heater that pre-heats the combustion chamber.
The mechanism, step by step, is in what a glow plug does, and the difference from the gasoline part is in does a diesel engine have spark plugs.
How the wait-to-start sequence works
The sequence is: key on, plugs heat, a light goes out, you start, and some systems keep the plugs on briefly afterward. Ford’s owner supplement for the 7.3L Power Stroke describes it this way: the powertrain control module energizes the plugs as soon as the ignition is turned ON, then sets how long they stay on from the engine oil temperature and barometric pressure sensors. The WAIT TO START light stays on while glow plug heat is needed, and Ford says to wait until it goes out before cranking.
Other systems differ. Bosch describes a post-glow phase in which modern plugs stay active after the engine has started, for efficient, fuel-economical running in stop-and-go traffic; its brochure lists a post-glow time of 3 minutes for its Duraterm plugs. Your owner’s manual explains your vehicle’s sequence. The glow plug light guide covers what the dash light can mean.
Types: metal and ceramic
Bosch’s glow control unit sheet refers to metal or ceramic low-voltage glow plugs, and its brochure lists metal-element and ceramic-element plugs. In its Duraterm design, Bosch describes a self-regulating control system with a dual-control regulating and heating coil.
Voltage matters. Bosch’s fault-diagnosis poster lists overvoltage, such as 24 volt starting assistance or fitting a plug of the wrong voltage, as a cause of plug damage, so confirm the voltage and part for your engine in your manual before touching one with a power source.
A glow control unit, or controller, can manage the plugs. Bosch says this unit performs control and diagnostic tasks and can determine the most efficient heat-up time and temperature, either autonomously or through the engine control unit.
Signs of failure
Common signs are a hard start when cold, long cranking, a rough idle right after starting, and more exhaust emissions right after starting. Bosch lists those four as conditions that most likely indicate it is time to check the plugs. NGK adds that a plug can fail unnoticed in warm weather and then cause a cold no-start, and that a workshop will need to test the plugs if the pre-glow control light is on or flashing.
Bosch also warns that excessive cranking can dilute engine oil with fuel. Do not crank for long periods: Ford’s 7.3L supplement says not to crank for more than 30 seconds at a time, and to wait 30 seconds before trying again.
Testing
Testing glow plugs means finding out whether the heating circuit works, and the safe method comes from your service manual. Our guide on how to test glow plugs covers the safety rules, the common causes outside the plug itself and how to read a result. A free glow plug resistance check helper lets you compare a reading to the value from your own manual.
Replacement overview and when to see a shop
Replacement is a job for a technician when plugs are seized, access is difficult or fuel and electrical systems are involved. Bosch recommends replacing all plugs at the same time, and warns that a seized plug can break off in the head, which would require time-consuming cylinder head disassembly.
Our page on glow plug replacement cost explains what drives the price, without quoting prices.
Safety
Disconnect the battery only as your manual directs, work on a cool engine, keep sparks and flames away from fuel, and never get under a vehicle supported only by a jack. A Ford dealer bulletin hosted by NHTSA (written for an unrelated F-150 Lightning recall, with Ford’s standard jacking warnings) says to support a raised vehicle with floor stands and to raise it only on a hard, level surface. Stop and see a qualified technician for a flashing glow plug light with other warnings, any fuel leak, or a seized or broken plug.
Engine-specific guides
More engines will be added over time. If your engine is not covered, your owner’s manual and a qualified technician are the right sources.
Related guides
Cold starts involve more than plugs. The engine block heater guide covers the other common cold-start aid, and the diesel engine maintenance checklist includes glow plug system checks.
All Glow Plugs guides
- 7.3 Powerstroke Glow Plug Relay: Function, Failure Signs, Testing
What the 7.3 Powerstroke glow plug relay does, how its failure can look, and the safe order for checking it before replacing glow plugs or parts.
- 7.3 Powerstroke Glow Plugs: Overview and Replacement Notes
7.3 Powerstroke glow plugs: how Ford describes the system, the wait-to-start light, testing and replacement cautions, and where to confirm fitment.
- Glow Plug Light: What It Means and What to Do When It Flashes
What the diesel glow plug light means, how normal wait-to-start differs from a fault, and what to check or do when it flashes or stays on.
- Glow Plug Replacement Cost: What Drives the Price
What drives glow plug replacement cost: plug count, engine access, seized plugs and labor. Learn how to get a quote, with no price claims here.
- How to Test Glow Plugs: Safe Methods and Readings
How to test glow plugs safely: the safety rules, what a resistance check can tell you, other causes to rule out, and when to hand it to a technician.
- What Does a Glow Plug Do?
What does a glow plug do? It pre-heats a diesel's combustion chamber for cold starts. See the key-on to afterglow sequence and why gas engines skip it.
Answers to common questions
How many glow plugs does a diesel have?
It depends on the engine, so check your manual. Ford's 7.3L Power Stroke supplement lists eight glow plugs, and Ford's diagnostic summary for that engine lists separate fault codes for glow plug circuits 1 through 8. Other engines have different numbers. Replace by the count and part specified for your exact engine, year and emissions package.
Can I drive with a bad glow plug?
Sometimes the engine still starts when warm, but you risk harder cold starts and more wear. Bosch warns that excessive cranking can dilute engine oil with fuel, and NGK notes that a faulty plug on a car with a particulate filter can lead to a clogged filter. A flashing glow plug light with other warnings is a reason to stop and ask a technician.
How long do glow plugs last?
No dependable figure exists in the manufacturer documents we reviewed. NGK says car makers do not set mandatory change intervals for glow plugs, but performance can decline over time, so it suggests having them checked before winter. Bosch lists no-start, long cranking, rough idle after starting and excess exhaust emissions after starting as signs it may be time to replace them.
Is a glow plug the same as a spark plug?
No. A spark plug makes the spark that ignites fuel in a gasoline engine. A glow plug is a heater that warms the combustion chamber of a diesel so compression can ignite the fuel when the engine is cold. A diesel has no spark plugs. The spark plug comparison page sets the two parts side by side.
Should I replace all glow plugs at once?
Bosch recommends it: its FAQ says that if one glow plug fails, the others may not be far behind, and that changing all at the same time minimizes down-time and labor costs. Your manual or a qualified technician can confirm the right approach for your engine, especially if a plug is seized or breaks during removal.
Why does my glow plug light flash?
NGK says that if a pre-glow control light is on or flashing (and, in certain models, the MIL lamp is also on), or there are cold-starting issues, a workshop will need to test the glow plugs. The meaning of a flash pattern depends on the maker, so use your owner's manual. Our glow plug light page explains how to tell normal pre-heat from a fault.
Sources
- Bosch Auto Parts (US): Glow Plugs, technical information and FAQboschautoparts.com
- Bosch: Glow plugs Duraterm, Duraterm HighSpeed and DuraSpeed (brochure)boschaftermarket.com
- Bosch: Fault diagnosis at a glance, glow plug faces (poster)boschaftermarket.com
- Bosch: Glow Control Unit summary (2018)bosch-mobility.com
- Ford: 7.3L Power Stroke Diesel Supplement to the Owner Guide (2000)fordservicecontent.com
- Ford: 2000 MY OBD System Operation Summary for 7.3L Diesel Enginefordservicecontent.com
Worth reading next
- 7.3 Powerstroke Glow Plug Relay: Function, Failure Signs, Testing
What the 7.3 Powerstroke glow plug relay does, how its failure can look, and the safe order for checking it before replacing glow plugs or parts.
- 7.3 Powerstroke Glow Plugs: Overview and Replacement Notes
7.3 Powerstroke glow plugs: how Ford describes the system, the wait-to-start light, testing and replacement cautions, and where to confirm fitment.
- Glow Plug Light: What It Means and What to Do When It Flashes
What the diesel glow plug light means, how normal wait-to-start differs from a fault, and what to check or do when it flashes or stays on.
- Glow Plug Replacement Cost: What Drives the Price
What drives glow plug replacement cost: plug count, engine access, seized plugs and labor. Learn how to get a quote, with no price claims here.
- How to Test Glow Plugs: Safe Methods and Readings
How to test glow plugs safely: the safety rules, what a resistance check can tell you, other causes to rule out, and when to hand it to a technician.
- What Does a Glow Plug Do?
What does a glow plug do? It pre-heats a diesel's combustion chamber for cold starts. See the key-on to afterglow sequence and why gas engines skip it.