How to Start a Diesel in Cold Weather
- Written by
- Diesel Glow Plug Editorial Team
- Reviewer
- Diesel Glow Plug Editorial Team
- Review date
- First published
Start a cold diesel by following your owner's manual's sequence. On the Ram diesel supplement we read, that means waiting for the Wait To Start lamp to go out, cranking no more than 15 seconds at a time, and waiting two minutes between tries. The Ram manual says never to use starting fluid in its Cummins diesel. Block heater use is in your manual.
Safety first
Do not use starting fluid (ether) or any flammable liquid in an intake unless your manual says so; the Ram diesel supplement forbids it in its Cummins diesel because of the risk of a flash fire, explosion and injury. Run the engine only outdoors or with ventilation, never in a closed garage, because exhaust contains carbon monoxide. Stop and see a qualified technician for a flashing glow plug light with warning messages, fuel leaks, repeated no-starts, DEF or derate warnings, or anything that needs fuel lines opened. Disconnect the battery only if your manual says so.
To start a diesel in cold weather, follow the starting sequence in your owner’s manual and give the engine the warmth it needs first. That usually means a block heater when you have one (see engine block heaters), then the glow plug or heater cycle, then a short crank. This page uses two Ram manuals (one for a 2014 Ram 5500, one for a Ram 1500 3.0L diesel) as examples of what makers say, and it may not match your engine.
What is the right start sequence?
The right sequence is the one in your manual. In the 2019 Ram 2500/3500/4500/5500 diesel supplement we read, when engine temperatures fall below 66 F (19 C), the Wait To Start lamp stays on while the intake manifold heater system is active. It stays on for a period that varies with engine temperature, and you follow the Normal Starting steps with that exception. The manual says to turn the ignition to START after the lamp goes off.
Your engine may use a glow plug lamp or message instead; read your manual for what it tells you to do. See what glow plugs do and what the glow plug light means.
Wait to start and the heater cycle
Treat the lamp as an instruction, not a suggestion. On the Ram heavy-duty trucks in that supplement, if the ignition stays on more than two minutes after the lamp goes out, or the engine stalls, you turn the ignition off for at least five seconds and back on to recycle the heaters. Below 0 F (-18 C) the manual says it may help to cycle the heaters twice, but warns that excessive cycling damages the heater elements or reduces battery voltage. This is one maker’s rule. Yours may differ.
Battery and cranking
Limit each crank and let the starter rest. The Ram diesel supplement says not to crank more than 15 seconds at a time, then to turn the ignition off and wait at least two minutes for the starter to cool. Heater cycling draws on the battery as well: the manual says additional engine run time may be required to maintain battery state of charge. Ask a technician about your battery if starts are slow.
Block heater and fuel readiness
A block heater warms the coolant while you are parked. The Ram diesel supplement says at least one hour plugged in, and the 2019 Ram 1500 Classic 3.0L diesel supplement says two hours before start and recommends it where temperatures routinely fall below -10 F. Details, including cords, are in diesel engine block heaters and block heater cord safety.
Fuel has to flow as well. That Ram 1500 Classic supplement page also describes a 12 volt heater built into the fuel filter housing that aids in preventing fuel gelling. For what gelling is and how it shows up, read the gelling basics, and try the cold-weather diesel guide.
What not to use: starting fluid
Do not use starting fluid. The Ram diesel supplement says starting fluids or flammable liquids must never be used in the Cummins diesel, and not to pour diesel fuel, flammable liquid or starting fluid (ether) into the air cleaner canister or intake piping, with a risk of a flash fire and explosion. If your manual allows it for your engine, it will say so in its own words. If it does not, do not.
Troubleshooting a no-start
Work down a short list and stop at the first unsafe item.
- Check for warning lights and messages and compare them to your manual.
- If the Water in Fuel indicator light stays on, the Ram diesel supplement says do not start the engine until water is drained from the fuel filters. Draining is a manual or technician task.
- Check that you followed the wait-to-start sequence and did not crank beyond the limit.
- Consider the battery and the block heater (was it plugged in, and for how long).
- If it still will not start, or it starts and stalls repeatedly, call a qualified technician. Do not use starting fluid.
All Cold Weather guides
- Block Heater Cords and Extension Cords: Safe Use
Block heater cord and extension cord checklist from owner's manuals and OSHA: grounded three-wire cords, GFCI outlets, damage signs, and when to stop.
- Diesel Engine Block Heater: Trucks, Tractors and Generators
How a block heater helps a diesel truck, tractor or generator start in the cold, what two Ram manuals say about plug-in time, and why your manual rules.
- Diesel Fuel Gelling: Temperatures, Signs and Basics
What diesel fuel gelling is, how cloud point and pour point differ, why no single temperature applies, and what makers and DOE sources say on winter fuel.
- Engine Block Heaters: How They Work and When to Use One
What an engine block heater is, how it warms coolant for easier cold starts, and how to check your manual for when to plug in and which cord to use.
Answers to common questions
Should I use starting fluid?
No, not on the engine our source covers. The 2019 Ram 2500/3500/4500/5500 diesel supplement says starting fluids or flammable liquids must never be used in its Cummins diesel, and warns of a flash fire and explosion with risk of serious injury and engine damage. Other makers may say the same or differ, so read your manual's starting fluids section and follow it.
How long should I crank?
Follow your manual. The 2019 Ram 2500/3500/4500/5500 diesel supplement says not to crank for more than 15 seconds at a time, or starter motor damage may result. It says to turn the ignition off and wait at least two minutes for the starter to cool before trying again. If it will not start, stop and have a qualified technician look at it rather than keep cranking.
Why does it start then die?
On the Ram diesel supplement we read, the intake manifold heaters run a cycle keyed to the Wait To Start lamp. If the engine stalls after the first start, the manual says to turn the ignition off for at least five seconds and back on to recycle the heaters, or you may get excessive white smoke and poor performance. Repeated stalling is a reason to see a qualified technician.
Why will my diesel not start in cold weather?
We cannot diagnose your truck from here, and our sources do not rank causes. Check the warning lights against your manual, note whether the Water in Fuel light is on, and have a qualified technician look at repeated no-starts. Do not use starting fluid to force it.
How does a block heater help?
A block heater warms the engine coolant while parked, so the engine starts from a warmer point. A Ram 2500/3500/4500/5500 diesel supplement says it must be plugged in at least one hour for an adequate warming effect, and the 2019 Ram 1500 Classic 3.0L diesel supplement says two hours before start. Use the time in your own manual. See the block heater guides on this site for cords and diesel details.
Sources
- 2019 Ram 2500/3500/4500/5500 6.7L Diesel Supplement: Wait To Start / starting below 66 Fvehicleinfo.mopar.comp. 34
- 2019 Ram 2500/3500/4500/5500 6.7L Diesel Supplement: starting procedure, cranking limitvehicleinfo.mopar.comp. 34
- 2019 Ram 2500/3500/4500/5500 6.7L Diesel Supplement: manifold heater cycling below 0 Fvehicleinfo.mopar.comp. 38
- 2019 Ram 2500/3500/4500/5500 6.7L Diesel Supplement: engine block heatervehicleinfo.mopar.comp. 48
- 2019 Ram 2500/3500/4500/5500 6.7L Diesel Supplement: starting fluidsvehicleinfo.mopar.comp. 39
- 2019 Ram 1500 Classic 3.0L Diesel Supplement: Extreme Cold Weathervehicleinfo.mopar.comp. 33
Worth reading next
- Engine Block Heaters: How They Work and When to Use One
What an engine block heater is, how it warms coolant for easier cold starts, and how to check your manual for when to plug in and which cord to use.
- Block Heater Cords and Extension Cords: Safe Use
Block heater cord and extension cord checklist from owner's manuals and OSHA: grounded three-wire cords, GFCI outlets, damage signs, and when to stop.
- Diesel Engine Block Heater: Trucks, Tractors and Generators
How a block heater helps a diesel truck, tractor or generator start in the cold, what two Ram manuals say about plug-in time, and why your manual rules.
- Diesel Fuel Gelling: Temperatures, Signs and Basics
What diesel fuel gelling is, how cloud point and pour point differ, why no single temperature applies, and what makers and DOE sources say on winter fuel.