Diesel Engine Block Heater: Trucks, Tractors and Generators
- Written by
- Diesel Glow Plug Editorial Team
- Reviewer
- Diesel Glow Plug Editorial Team
- Review date
- First published
A block heater warms a diesel's coolant before you start it, which eases cold starts and can cut warm-up idling. When to plug in, for how long and with what cord is set by your maker: two Ram manuals give different times, one hour and two hours. Use your own manual's figures, not a general rule.
Safety first
A block heater runs on mains voltage outdoors. Unplug it and stop if the cord or plug is damaged, and see a qualified technician for installation, wiring or coolant work. Never use starting fluid on a diesel with intake heaters; see how to start a diesel in cold weather.
This is part of: Engine Block Heaters: How They Work and When to Use One
A diesel block heater warms the engine’s coolant before you start, so a cold diesel turns over and fires more easily. The general idea is covered in engine block heaters: how they work; this page is the diesel truck, tractor and generator view. Your owner’s manual always has the final word, and the numbers below come from two Ram manuals only as examples.
Why do diesels benefit from a block heater?
A diesel relies on heat to ignite fuel, so a cold engine is harder to start. The 2019 Ram 2500/3500/4500/5500 diesel supplement describes a “Wait To Start” lamp that stays on while the intake manifold heater system is active when engine manifold air temperature is below 66 F (19 C). A block heater raises the starting temperature of the engine, so the start sequence your manual describes begins from a warmer position. The U.S. Department of Energy’s idle-reduction page notes that a cab or bunk heater for heavy-duty trucks can also include an engine block heater to eliminate “warm up” idling.
For the glow plug side of the start, see diesel glow plugs.
What do the manuals say about plug-in time and temperature?
Two Ram manuals give two answers, which is the point: use yours.
| Manual | Plug-in time | Temperature guidance |
|---|---|---|
| 2019 Ram 1500 Classic 3.0L diesel supplement | Two hours prior to start | Recommended where it routinely falls below -10 F; required for cold starts under -20 F |
| 2019 Ram 2500/3500/4500/5500 diesel supplement | At least one hour | Recommended below 0 F (-18 C); required below -20 F (-29 C) |
Neither figure is a universal rule. A different engine, a different heater wattage or a different maker will differ.
Factory vs aftermarket block heaters
The 2019 Ram 1500 Classic 3.0L diesel supplement lists the engine block heater cord as a factory-installed option, so some trucks leave the factory with the heater and cord and some do not. We found no primary source comparing factory and aftermarket parts, so we make no recommendation. If you add a heater, follow the heater maker’s installation sheet and let a qualified technician do it, because installation can involve the coolant system and mains wiring.
Wattage and timers
Use the maker’s value for wattage and plug-in time. We give no wattage, because none appears in the manuals we opened. The printed rating is on the heater or in its documentation, and the cord and outlet should be matched to it by the manual. A timer can limit run time, but only use one that your heater’s documentation and a qualified electrician approve. The cord safety guide covers cords and outlets.
Notes for pickups, tractors and generators
For a diesel pickup, the manual is your first stop, and the DOE’s idle-reduction page mentions block heaters in the context of heavy-duty trucks. For tractors and generators, the sources we opened do not give figures, so use the operator manual and an electrician for the outlet and any generator wiring. Fuel also matters in the cold: read how cold turns diesel fuel waxy and try the cold-weather diesel guide.
Answers to common questions
At what temperature should a diesel be plugged in?
Your owner's manual decides. The 2019 Ram 1500 Classic 3.0L diesel supplement recommends it where temperatures routinely fall below -10 F and requires it for cold starts under -20 F. The 2019 Ram 2500/3500/4500/5500 diesel supplement recommends it below 0 F (-18 C) and requires it below -20 F (-29 C). If your manual is silent, ask the engine maker rather than copying another truck's figure.
Block heater vs glow plugs: which do I need?
They do different jobs, and some diesels have both. A block heater warms the coolant while the vehicle is parked. Glow plugs or a grid heater warm the combustion air or chamber during the start itself. The 2019 Ram 2500/3500/4500/5500 diesel supplement describes a Wait To Start lamp that stays on while the intake manifold heater is active when engine manifold air temperature is below 66 F (19 C), so the start routine in your manual still applies.
Can I leave it plugged in overnight?
Many people do, but the sources we read do not say that overnight is required or recommended. They give minimums: at least one hour in the 2019 Ram 2500/3500/4500/5500 diesel supplement, two hours before the start in the Ram 1500 Classic diesel supplement. Check your manual for a maximum, and consider a timer if your cord setup allows one, to avoid running the heater longer than needed.
Do tractors and generators use block heaters too?
Diesel tractors and generators can have coolant heaters, but the sources we opened cover trucks. We do not state wattage or plug-in time for tractors or generators. Use that machine's operator manual, and have a qualified technician check any wiring, especially on equipment that sits outside or runs on a generator.
Is a factory block heater better than an aftermarket one?
We cannot rank them, because no primary source we opened compares them. The Ram 1500 Classic diesel supplement lists the block heater cord as a factory-installed option, which means some trucks arrive with a heater and some do not. For an aftermarket part, follow the heater maker's installation sheet and have a qualified technician fit it.
Sources
Worth reading next
- How to Start a Diesel in Cold Weather
Start a diesel in the cold the way the manual says: wait-to-start lamp, cranking limits, battery, block heater, fuel, and why starting fluid is a no.
- Engine Block Heaters: How They Work and When to Use One
What an engine block heater is, how it warms coolant for easier cold starts, and how to check your manual for when to plug in and which cord to use.
- Block Heater Cords and Extension Cords: Safe Use
Block heater cord and extension cord checklist from owner's manuals and OSHA: grounded three-wire cords, GFCI outlets, damage signs, and when to stop.
- Diesel Fuel Gelling: Temperatures, Signs and Basics
What diesel fuel gelling is, how cloud point and pour point differ, why no single temperature applies, and what makers and DOE sources say on winter fuel.